How to get in to preboot cli in LSI.

Preboot CLI

 

If the customer cannot install the MegaCLI utility or it is not available for some other reason, you can get to the Preboot CLI and run the same commands as shown above.

The only difference is that the commands begin in the Preboot CLI after the 'MegaCli64' above.

For example:

$

$LDGetProp -Cache -LALL -a0 (Cache policy on the VDs)

$FwTermLog –Dsply –a0 (redirect the output to file)

$AdpAllInfo –a0 (Gives LSI FW and RAID type info)

$AdpBbuCmd -GetBbuStatus –a0 (BBU Status info)

$-AdpAllInfo -a0
$-PdList -a0
$-AdpEventLog -GetEvents -a0
$-fwtermlog -dsply -aALL -nolog -page20
$-cfgdsply -a0
$-adpbbucmd -a0
$-LdPdInfo -a0
$-LDInfo -LALL -a0