Collecting and analyzing Linux kernel crashes - crash

http://www.dedoimedo.com/computers/crash.html

Configuring Serial Console on Bare Metal Systems

Complete the following actions to set up the required serial console on a bare metal system:

  Change the baud rate in the Basic Input/Output Section (BIOS) by following these steps:
      Login into ILOM
      Click Host Management
      Click Host Control
      Select BIOS for the "Next Boot Device:" option
      Click Save
      Click Power Control under "Host Management"
      Restart the machine
      Launch the remote console
      After the machine restarts, select the "Advance" tab
      Click Enter on "Serial Port Console Redirection"
      Change the "bits per second" value to 115200
      Exit and save your changes, then wait for the automatic restart to complete

  Change the ILOM settings by following these steps:
      Login to ILOM
      Click ILOM Administration
      Click Connectivity
      Click the Serial port tab
      Change the Host Serial Port "Baud Rate" value to 115200
      Change the External Serial Port "Baud Rate" value to 115200
      Click "Save"

Regards
Gurudatta N.R